Electrolux Appliance Repair Service
Specialist repairs using genuine Electrolux spare parts
Laundry
Certified repair for Electrolux washing machine and tumble dryer. Drum, motor and control board faults resolved at home with genuine spare parts.
Washing machine not draining?
Most Electrolux laundry faults are repaired in a single visit. Get a free, no-obligation quote today.
Cooling
Same-day response for urgent Electrolux fridge and freezer breakdowns. Compressor, thermostat and sealed system repairs across Lancashire.
Fridge not cooling? Every minute counts.
Emergency Electrolux cooling repairs available today. Call now to save your food.
Cooking
Expert diagnostics for all Electrolux oven, cooker, hob and warming drawer. Heating elements, thermostats, igniters and control boards repaired on site.
Oven not heating evenly?
Certified Electrolux kitchen engineers across Blackpool. Book a repair and get cooking again.
Cooking
Professional Electrolux hob and warming drawer repair service in Blackpool. Certified technicians with genuine spare parts and a written warranty.
Oven not heating evenly?
Certified Electrolux kitchen engineers across Blackpool. Book a repair and get cooking again.
Cleaning & Extraction
Electrolux dishwasher and cooker hood repairs. Pump, spray arm, drainage and motor faults fixed at your home with genuine parts.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Electrolux parts and a written warranty included.
Climate Control
F-Gas certified engineers for Electrolux air conditioning. Installation, fault diagnosis and refrigerant handling across Lancashire.
Air conditioning not cooling?
Electrolux climate control repairs by certified engineers. Same-day response available across Lancashire.
Premium Appliances
Specialist repairs for Electrolux coffee machine and wine cooler. Precision components and brand-specific diagnostics for high-end appliances.
Premium appliance? Premium service.
Specialist Electrolux premium appliance repairs. Treated with the care your appliance deserves.
Why Electrolux Appliances Need Specialist Repair
Electrolux appliances incorporate advanced proprietary systems that require certified engineers with brand-specific training to diagnose and repair correctly.
Electrolux appliances use integrated electronic diagnostics. Our engineers connect directly to Electrolux control boards using brand-specific tools to read fault codes and pinpoint issues accurately.
Every repair uses genuine Electrolux spare parts sourced directly from authorised distributors. Original components ensure compatibility, performance and longevity — backed by a manufacturer warranty.
Electrolux appliances must meet strict UK safety regulations. Our certified engineers follow Electrolux service procedures and test every repair to BS EN standards before sign-off.
Many Electrolux appliances feature Wi-Fi connectivity and smart home integration. Our engineers can diagnose firmware issues, reset connectivity modules and restore remote control functionality.
Common Electrolux Error Codes
What does F1 mean on an Electrolux oven?
On pyrolytic models, F1 can indicate the door cannot close because the pyrolytic function is on; on other models it can indicate an electronic fault. Allow the oven to cool completely (at least 60 minutes) before handling. Check the door is assembled and closes properly; if it persists, contact an authorised service engineer.
What does an i90 family error (i90–i99 / .90–.99) mean on an Electrolux dishwasher?
i90-family errors indicate an electronic/control fault. Disconnect the dishwasher from power for at least 2 hours, then retry. If it returns, contact Customer Service / an authorised service engineer.
What does i60 / i61 / i69 / i6C mean on an Electrolux dishwasher?
i60 / i61 / i69 / i6C indicates a heating problem (the dishwasher is not heating water correctly). Ensure the inlet water temperature does not exceed 60°C. Reset the appliance, clean the filters and sump, and remove any foam or debris. If it persists, contact an authorised service engineer.
What does i20 / C2 / F2 / AL6 mean on an Electrolux dishwasher?
i20 / C2 / F2 / AL6 indicates a draining problem. Check the sink spigot, clean the filters and sump, and ensure the drain hose is installed correctly (including correct height). If it persists, contact an authorised service engineer.
What does i30 mean on an Electrolux dishwasher?
i30 indicates the anti-flood system has detected water in the base (possible leak). Close the water tap, switch off at the mains, and check filters/sump for foam and the door seal for debris. If it returns, contact an authorised service engineer.
Frequently Asked Questions
How do I connect an Electrolux electric, ceramic, or induction hob to the mains?
Electrolux requires that electric, ceramic, and induction hobs must be installed by a qualified electrician. Connection typically uses 2 × 230V (two phases) wiring. Never attempt to install these appliances yourself due to the serious risk of electrical hazard.
What is the “Machine Care” programme and why does the indicator light up?
Machine Care is a cleaning programme designed to clean the dishwasher interior with optimal results, removing limescale and grease build-up.
What does the padlock symbol mean on my Electrolux washing machine?
The padlock symbol indicates that the Child Lock function is activated. This prevents children from accidentally changing settings during a wash cycle. To deactivate it, press and hold the designated button or button combination for 3-5 seconds. The exact method varies by model, so check your user manual for specific instructions.
Can I install my Electrolux washing machine using a hot water connection?
Electrolux does not recommend installing washing machines on a hot water connection. Although the inlet valves can typically handle hot water up to about 65°C, washing programmes are designed for a cold water connection and do not use hot water continuously.
Why is my Electrolux fridge frosting up or the back wall wet?
Electrolux explains that a wet back wall can be part of normal functioning, because moisture in the air can condense on colder surfaces during cooling. In some situations, the droplets can freeze and ice can build up.
Areas We Cover in Lancashire
Electrolux appliance repair service across the ten largest towns in the county
Other Electrolux Group Brands
Appliances from other brands in the same corporate group are also repaired
Book a Electrolux Repair
Specialist Electrolux engineers. No-obligation quote.