Faber Appliance Repair Service
Specialist repairs using genuine Faber spare parts
Cooking
Expert diagnostics for all Faber induction hob and oven. Heating elements, thermostats, igniters and control boards repaired on site.
Oven not heating evenly?
Certified Faber kitchen engineers across Blackpool. Book a repair and get cooking again.
Cleaning & Extraction
Faber wall hood, ceiling mounted hood, venting hood, modular extractor and dishwasher repairs. Pump, spray arm, drainage and motor faults fixed at your home with genuine parts.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Faber parts and a written warranty included.
Cleaning & Extraction
Professional Faber venting hood and modular extractor repair service in Blackpool. Certified technicians with genuine spare parts and a written warranty.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Faber parts and a written warranty included.
Cleaning & Extraction
Professional Faber dishwasher repair service in Blackpool. Certified technicians with genuine spare parts and a written warranty.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Faber parts and a written warranty included.
Heating
Gas Safe registered engineers for Faber water heater. Fault diagnosis, part replacement and annual servicing across Lancashire.
No hot water or heating?
Faber heating breakdowns repaired fast by Gas Safe engineers. Available seven days a week across Lancashire.
Why Faber Appliances Need Specialist Repair
Faber appliances incorporate advanced proprietary systems that require certified engineers with brand-specific training to diagnose and repair correctly.
Faber appliances use integrated electronic diagnostics. Our engineers connect directly to Faber control boards using brand-specific tools to read fault codes and pinpoint issues accurately.
Every repair uses genuine Faber spare parts sourced directly from authorised distributors. Original components ensure compatibility, performance and longevity — backed by a manufacturer warranty.
Faber appliances must meet strict UK safety regulations. Our certified engineers follow Faber service procedures and test every repair to BS EN standards before sign-off.
Many Faber appliances feature Wi-Fi connectivity and smart home integration. Our engineers can diagnose firmware issues, reset connectivity modules and restore remote control functionality.
Common Faber Error Codes
What does it mean when the LED flashes twice on a Faber cooker hood?
Two LED flashes on a Faber cooker hood can indicate either that the remote control receiver has been activated, or that the activated charcoal filter alarm has been enabled. This is a confirmation signal showing the hood has registered your command.
What does a single LED flash mean on a Faber cooker hood?
A single LED flash on a Faber cooker hood indicates that the remote control receiver has been deactivated. To reactivate the remote control, press the same button for approximately 5 seconds until the LED flashes twice to confirm activation.
Why are the control panel buttons not responding on my Faber cooker hood?
Control panel buttons not responding on a Faber cooker hood may be caused by grease buildup, loose cable connections, or a faulty control board. Switch off at the mains, clean the control panel with a soft damp cloth, and leave unplugged for 10 minutes to reset. Symptoms may vary by model, so consult your instruction manual for model-specific guidance. If the issue persists, contact a qualified technician.
Why does my Faber cooker hood turn off automatically after 30 minutes?
If your Faber cooker hood switches off automatically after 30 minutes, the delay function is active. This feature allows the hood to continue extracting residual cooking odours after you finish cooking, then shuts off automatically. To deactivate this function, press and hold the delay button for approximately 3 seconds according to your model's instructions. This is a programmed feature, not a malfunction.
Why does my Faber cooker hood turn on by itself?
If your Faber cooker hood turns on automatically without manual activation, it is likely equipped with a heat sensor that detects high temperatures from your hob. This safety feature activates the extraction fan when excess heat builds up, helping to remove smoke and prevent overheating. Some models also feature K-Link technology that synchronises the hood with a compatible Faber induction hob, automatically adjusting extraction based on cooking intensity. This is normal operation for hoods with these features.
Frequently Asked Questions
When should I turn on my Faber cooker hood?
Turn on your cooker hood at least one minute before you start cooking. This allows proper air circulation to be established before cooking vapours and odours are produced.
What type of battery does the Faber cooker hood remote control use?
Faber cooker hood remote controls use a CR2032 coin cell battery. When replacing the battery, ensure the new battery is installed with the correct polarity (+ and -).
Is grease on the filters a fire hazard?
Grease deposited on filters is inflammable, which is why regular maintenance is essential. Clean or replace filters according to the recommended schedule based on approximately 3 hours of daily use. Never allow excessive grease to accumulate on the filters.
What do the energy efficiency ratings mean on Faber cooker hoods?
Faber cooker hoods are rated according to the EU energy label system, ranging from A+++ (most efficient) to G (least efficient). Higher-rated hoods consume less energy while providing effective extraction. Many Faber models achieve A or A+ ratings through efficient brushless motors and LED lighting.
Why is a ducted cooker hood quieter than a recirculating one?
Ducted hoods are quieter because the extracted air passes directly through the ducting without obstruction. In recirculating hoods, the air must pass through charcoal filters in addition to grease filters, creating extra resistance that increases noise levels. This additional filtration step is why recirculating hoods tend to be louder.
Areas We Cover in Lancashire
Faber appliance repair service across the ten largest towns in the county
Other Franke Group Brands
Appliances from other brands in the same corporate group are also repaired
Book a Faber Repair
Specialist Faber engineers. No-obligation quote.